What This Product Is and How It Works

The DELI Holesaw TCT 32 mm DHTCT032‑E1 is a hollow‑core cutter with tungsten carbide tipped (TCT) cutting teeth engineered for creating round openings. The annular design removes material only around the periphery of the hole, leaving a core (slug) that can be ejected, reducing drilling effort and saving time compared with solid bits. Hole saws with TCT teeth cut efficiently and maintain sharper edges longer than plain steel teeth under repeated use.

To use, attach the holesaw to a compatible arbor or mandrel and secure it in the drill’s chuck. A pilot bit helps centre the hole saw and stabilise the cut, while the body’s carbide‑tipped teeth engage the work surface as the drill rotates.

Material Quality, Durability and Environmental Performance

The TCT (tungsten carbide tipped) cutting teeth provide enhanced hardness and abrasion resistance compared with standard steel. This results in longer cutting life and lower wear when cutting wood, plastic, gypsum board, MDF, plywood, and similar materials. The saw body is typically made from a robust steel tube that resists deformation during cutting.

Under typical Kenyan workshop and site conditions—including moderate dust and temperature variations—the bit performs reliably when operated at appropriate speeds and with steady feed pressure.

Installation, Handling and Compatibility

Mount the TCT holesaw onto a suitable arbor compatible with your drill’s chuck size, then insert the assembly into the drill. Ensure the pilot bit is present and centred before starting the cut. Begin drilling at low–moderate speed to engage the material, then maintain steady rotational speed and feed force. Avoid using hammer/percussion mode as this can damage the carbide teeth.

Always wear eye protection and gloves. Manage heat and dust by withdrawing the bit periodically to clear chips and allow cooling where cutting deeper holes. Confirm that the arbor and pilot bit match the diameter of this holesaw.

Typical Applications in Kenya

This 32 mm holesaw is used for circular opening tasks in construction, electrical, plumbing, and woodworking applications. Typical uses include drilling holes for cable conduits, pipe entries, switch box cut‑outs, ventilation points, and routing through panel materials. Suitable materials for drilling include wood, laminated boards, plastics, and some tile or board surfaces depending on carbide grade.

It is used by installers, fundis, carpenters, electricians, and fabricators on residential and commercial projects. For more drilling and cutting accessories, see our full range in the Power Tool Accessories Category or browse all options in our Shop.

4. TECHNICAL SPECIFICATIONS TABLE

5. PRODUCT ATTRIBUTES (WooCommerce Ready)

Material: Steel body with TCT cutting teeth
Size / Dimensions: 32 mm diameter
Color: Specification varies by supplier batch
Finish: Tungsten carbide tipped teeth
Application: Circular hole cutting in construction and fabrication materials
Brand: DELI
Unit of Sale: 1 holesaw
Country of Origin: Confirm on request

6. PRODUCT CATEGORIES

Power Tool Accessories
Power Tool Accessories Category

7. INTERNAL NAVIGATION LINKS

Browse other drilling and cutting accessories in our Shop.
Learn more about Ngong Hills Merchants on our About Us page.
For specification confirmation or stock enquiries, visit our Contact Us.
Explore similar products in the Power Tool Accessories Category.

8. RELATED PRODUCTS

Related Products:

20 mm TCT Holesaw
25 mm TCT Holesaw
UYUSTOOLS 3‑Piece Masonry Drill Bit Set BCCS33
Router Chamfer Bit 16 mm 819